Blog

As an entertainment device, television not only enriches people's lives, but also allows them to learn a lot from it, so it can be found in homes nowadays. Generally, there are different models of televisions in the home, and the variety of TV shows makes people's lives stronger. Moreover, having a TV requires a TV hanger to place it, which can save space in the home. As people may not be familiar with the information about TV wall hangers, the following editor will provide a detailed introduction to TV hangers.

Installation Steps for TV Hanger

1. Prepare the installation materials and pay attention to the quality of the hangers and hardware when purchasing.

2. When installing, according to the instructions, the general steps are relatively simple, and the most important thing is hands-on ability.

3. When choosing a location, do not choose a load-bearing wall or a place with strong humidity and brightness.

4. The installation of TV racks is not difficult, but the handling of wiring interfaces requires certain skills. This requires attention to leaving suitable positions during installation.

Installation precautions for TV rack

1. Selection of location and location

When installing a TV hanger, the first step is to choose the location where the TV is installed to ensure its clarity. In addition, the wall should be screened and the load-bearing capacity of the wall should be carefully checked before installing the TV hanger. Due to the fact that many indoor walls are hollow, the installation of wall mounted televisions has certain requirements for the walls. For example, LCD TV, according to the national "LCD TV Installation Service Standard", the load-bearing capacity of the installation wall should be ensured to be no less than 4 times the actual load-bearing capacity of the LCD TV. After installation, the TV should not tip over when tilted back and forth by 10 degrees.

2. Selection of position size

Generally, when installing a TV hanger, there must be a certain amount of space. There should be a heat dissipation space on the back, top, bottom, left, and right sides of the TV, and there should be at least 15 centimeters between the TV hanger and the TV wall. Otherwise, if the TV is too close to the wall, on the one hand, the cooling effect of the TV is not good, which affects the service life of the TV. On the other hand, the wall is prone to discoloration and affects aesthetics due to long-term baking caused by the TV's heat dissipation.

3. Handling of wiring

The various cable interfaces of the TV installation rack should not collide with the wall or be too bent. Generally, the cable should be placed at the back of the TV.

4. Different wall methods

TV hangers need to be classified according to the type of wall, and different installation methods should be used for different walls. If a regular brick wall requires the installation of a LCD TV hanger, all you need to do is punch a hole in the wall with an impact drill, insert a plastic expansion pipe, and finally fix the LCD TV hanger with screws to hang the LCD TV.